Announcement

Collapse
No announcement yet.

Kyosho Ready Set EZ-B Miku Racing Sandmaster

Collapse
X
Collapse

  • Kyosho Ready Set EZ-B Miku Racing Sandmaster



    Latest from Kyosho:



    A new Sandmaster buggy equipped with Nendroid Miku and genuine driving ability!

    SUPER GT GT300 competitor Good Smile Racing and Kyosho collaborate for a super Kawaii Sandmaster. Front, roof, side panels, with dedicated design by Good Smile Racing. The white frame, pink damper, the color wheel rings, and the green springs, turn the tough Sandmaster into having a cute image. The running of racing Miku 2014ver. with fluttering tails, why not experience this together?

    Features:

    • Custom Miku radio wrap!
    • Good Smile Racing designed body panels!
    • Speedometer is reading 390km/h!?
    • Specially designed frame to increase the ****pit section for Miku.
    • Good Smile Racing Logo tires and matching pink wheel rings!
    • Special edition only colored dampers and springs!
    • Dedicated Nendroid Plus Racing Miku 2014ver. As standard.
    • Frame is a dedicated design that greatly expanded the ****pit portion for figures, can also be a changed to a roll bar ceiling panel.
    • Comes with custom Miku radio wrap.
    • The dampers are also a dedicated pink color, and custom green springs.
    • "Ready Set" does not require assembly, only AA batteries for the radio are needed.
    • Maintenance is possible with a single screwdriver.



    Note: Figure does not move, only the upper body is included. Lower body is not included. Image might be slightly different from the actual product.

    ReadySet Contents:

    • Completed chassis (servo, receiver, ESC, motor.)
    • KT-200 2.4GHz transmitter
    • 7.2V-1800mAh nickel-metal hydride battery
    • AC charger (multi-plug)
    • Tool (cross wrench / foil)



    Required For Operation:

    • 4 AA batteries for the transmitter



    Chassis Technical Data:

    Length: 409mm
    Width: 225mm
    Height: 162mm
    Wheelbase: 270mm
    Track width (F/R): 190mm
    Tire (F/R): f100mm×36mm
    Gear ratio: 8.76:1
    Weight: app.1,500g
    Motor: 540 type 22 turn
    Radio: Syncro KT-200

    30830T1B - $419.99











      Posting comments is disabled.

    Categories

    Collapse

    article_tags

    Collapse

    Latest Articles

    Collapse

    • RC4WD 1/10 Holley® Chrome Valve Covers for Scale V8 Engine
      NWH Admin
      RC4WD 1/10 Holley® Chrome Valve Covers for Scale V8 Engine


      One of the most well know brands in Motorsports. These are the all new 1/10 Holley® Valve covers for our popular V8 Motor, officially licensed by Holley®.Only available from RC4WD and our Dealers.



      Specifications:
      • Billet Aluminum
      • Chrome Plated and Polished
      • Highly Detailed
      • Length: 2.32in / 59.1mm
      • Width: 0.62in / 16mm
      • Height: 0.41in / 10.5mm
      • Each Weight: 0.31oz / 9g






      Shown installed with RC4WD 1/10 V8 Scale Engine (Z-S1043) for example (Not Included)





      Shown installed with RC4WD 1/10 V8
      ...
      07-17-2015, 03:56 PM
    • RC4WD Beast II 6x6 Truck Kit
      NWH Admin




      Are you ready for the end of days? The opportunities are limitless with the Beast II truck kit. Sunday driver to world domination. Its up to the imagination to complete your Beast II.
      
The Beast II has unmatched scale detail, allowing for a realistic model, or a true performance oriented 6x6 trail truck.
      
The Beast II is built with engineering and design first. Packed with great products like the R3 2 speed transmission, Yota II axles, Triton transfer case, Mil-Spec ZXL tires, and 1.9 Humvee beadlock wheels. There are no better options!

      Beast II... What's in store for you?

      Custom Designed for True to Scale Looks
      Realistic Aluminum Ladder Frame Chassis
      R3 Single Speed Transmission
      Center Mounted Realistic 4x4 Transfer Case
      Cast Metal Axles with Locked Differentials
      3 Link front and 8 Link rear suspension
      Humvee 1.9 Internal Beadlock Wheel
      MIL-SPEC ZXL 1.9 Tires
      Chassis mounted Steering servo
      Dual Spring 80mm Scale Black Shocks







      Hammer Transfer Case
      Ratio - 1:1 Gearing 32P hardened steel gears, 8 bearing Design, cast casing

      All New R3 Scale 2 Speed Transmission Ratios: Pinion/spur 14/64 =4.57:1 Internal 1.78:1 Gears - Wide steel 32P, Delrin spur, slipper clutch
      ...
      04-15-2015, 07:52 PM
    • RC4WD Gelande 2 Truck Kit with Cruiser Body Set
      NWH Admin




      Experience the versatility and advanced design of the Gelande 2 for yourself. Packed full of capability, the Gelande 2 is ready for any challenging condition. Put your off-road driving to the test and see why the G2 is unmatched in its class!


      G2 is built with quality materials and craftsmanship. It can maneuver extreme descents and climbs with ease. The new R3 single speed transmission provides power down to the transfer case and out to the all new Yota II axles.


      The core of the G2 is built for the true off-road enthusiast. From customized options to tried and true performance. From emergency and expedition vehicles, to daily drivers and down and dirty off-road rigs. It can pull off many looks and with the endless add-ons offered, you will be able to customize your G2 and have it fit any identity.


      The G2 comes with 4 link rear and 3 link front with panhard bar as standard. The servo is mounted on the chassis out of view for a more scale appearance.


      Are you ready for your off-road experience?


      • Custom Designed for True to Scale Looks
      • Realistic Aluminum Ladder Frame Chassis
      • R3 Single Speed Transmission
      • Center Mounted Realistic 4x4 Transfer Case
      • Cast Metal Axles with Locked Differentials
      • 3 Link front and 4 Link rear suspension
      • 1.9 Stamped Steel Beadlocks w/lug nuts
      • Super grip dirt grabber Tires
      • Chassis mounted Steering servo
      • Plastic fuel cell receiver box
      • Dual spring oil filled Shock absorbers








      All New Hammer Transfer Case
      Ratio - 1.47:1 Gears - Wide 32P hardened steel gears, - 8 bearings, cast casing


      All New R3 Single Speed Transmission
      Ratios: Pinion/spur
      ...
      02-06-2015, 04:15 AM
    • Kyosho Readyset Madforce Kruiser VE 2.0 4WD Monster Truck
      NWH Admin


      Latest from Kyosho: Drivers and spectators alike will be blown away by the explosive acceleration of the Kruiser VE as soon as the throttle trigger is pulled on this intimidating monster truck. Acceleration is so powerful, good control of the front end will be needed to prevent back flips from a standing start. Needless to say, wheelies are a breeze! You will also believe a truck can fly if you have a jump ramp nearby. The energy source for this extraordinary power and performance comes from the Team Orion brushless motor system and delivers powerful output like you have never experienced before. And with a heavy-duty chassis and drive train to back it up, the MAD FORCE Kruiser VE 2.0 demonstrates superior durability time and again. Also, the Readyset features a pre-assembled chassis so just arrange your own batteries for the chassis and transmitter and a battery charger and you’re ready to crunch in true monster truck power and st
      ...
      02-04-2015, 05:10 AM
    • HPI 1/5 Baja 5R On-Road Car
      NWH Admin


      Latest from HPI: The Baja 5R On-Road takes the HPI Baja concept to all-new places: to the streets! With a lowered suspension designed purely for on-road action, the Baja 5R is the perfect way to enjoy large-scale fun while burning up the pavement! The first thing you'll notice about the Baja 5R is the huge 1970 Ford Boss Mustang body, which is set off by a set of vintage 8-spoke wheels and Tarmac Buster tires! This iconic muscle car is the perfect fit for the the rear-wheel drive Baja 5R, and the setup of the Baja 5R will let you pull off impressive, controllable powerslides for awesome realistic driving! The Baja 5R suspension and drivetrain is bas
      ...
      01-29-2015, 08:26 PM
    • Kyosho Ready Set EZ-B Miku Racing Sandmaster
      NWH Admin


      Latest from Kyosho:



      A new Sandmaster buggy equipped with Nendroid Miku and genuine driving ability!

      SUPER GT GT300 competitor Good Smile Racing and Kyosho collaborate for a super Kawaii Sandmaster. Front, roof, side panels, with dedicated design by Good Smile Racing. The white frame, pink damper, the color wheel rings, and the green springs, turn the tough Sandmaster into having a cute image. The running of racing Miku 2014ver. with fluttering tails, why not experience this together?

      Features:

      • Custom Miku radio wrap!
      • Good Smile Racing designed body panels!
      • Speedometer is reading 390km/h!?
      • Specially designed frame to increase the ****pit section for Miku.
      • Good Smile Racing Logo tires and matching pink wheel rings!
      • Special
      ...
      01-25-2015, 06:43 AM
    Working...
    X