Announcement

Collapse
No announcement yet.

Hitec HS-7985MG High Torque Digital Servo

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hitec HS-7985MG High Torque Digital Servo

    New from Hitec:

    [attachment=0:1o7tduni]1.jpg[/attachment:1o7tduni]

    The new HS-7985MG High Torque Digital Servo has the added benefit of our new G2 second generation programmable digital circuit. This circuit has twice the resolution of our original circuit while adding programmable overload protection. The technology doesn’t stop at the circuit board, with a high performance coreless motor, dual ball bearing supported output shaft, bushing supported gear shafts and our Heavy Duty Metal gear train the HS-7985MG was designed to withstand the stress of larger high performance aircraft and on/off road vehicles.


    Motor Type: Coreless
    Bearing Type: Dual Ball Bearing
    Speed: 0.16 / 0.13 sec @ 60 deg.
    Torque: 144 / 172 oz.in (4.8v/6v)
    Size: 1.57" x 0.78" x 1.45"
    Weight: 2.18oz

    Detailed Feature Descriptions
    - G2 Digital Circuit
    - Coreless Motor
    - Dual Ball Bearing Supported Output Shaft
    - Metal Gear Train (MK first gear)

    Programmable Features Include:

    * Dead Band Width
    * Direction of Rotation
    * Speed of Rotation (slower)
    * End Points
    * Neutral Points
    * Fail Safe On/Off
    * Fail Safe Point
    * Resolution* (default is high resolution)
    * Overload Protection* (default is off)

    *these features are only programmable with the HFP-20 field programmer
    Last edited by Rckcrwlr; 03-31-2009, 04:11 PM.
    sigpic

    Rckcrwlr's Feedback Thread
Working...
X