my ax10 comp

[63comet]

Integy 45turn
2000mah 3 cell lipo mounted on front upper links with homemade plate
mamba max
cc bec set at 6.3v
hitec 5955tg steering servo
axial steel lockers
futaba 3pm 2.4
home made bent delrin lower links
homeade rear upper 4-link plate using the stock lower links
home made teflon center skid
currently running panther cougers with custom memory foams
not decided on which dig setup yet
traxxas big bore front shocks, jp customs rear

[DRCMAN]

Re: my ax10 comp

Nice rig!!!!!!!!!

[EvilTwin v2]

Re: my ax10 comp

Looks good!

[63comet]

Re: my ax10 comp

Thanks, Amazing crawler for a stock chassis.

[Rockbound]

Re: my ax10 comp

nice looking rig! i am digging the paint!!

[63comet]

Re: my ax10 comp

More updates. Picked up a vf dig. Made a new rear 4-link plate to mount a fullsize servo(hobbico 333oz tg, overkill!!) The servo pulls and pushes straight in and out, no binding. Also picked up an mfm black widow chassis. Excellent chassis so far in my limited usage. Made a front fourlink plate that also mounts the lipo down near the driveshaft.

[DRCMAN]

Re: my ax10 comp

Nice upgrades 333oz Too much is never enough

[Rockbound]

Re: my ax10 comp

Nice upgrades 333oz Too much is never enough

beat me too it! there is never overkill!!

[63comet]

Re: my ax10 comp

Nice upgrades 333oz Too much is never enough

beat me too it! there is never overkill!!

You are correct