Announcement

Collapse
No announcement yet.

upgrading the ol king

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • upgrading the ol king

    Ok so I finally got a whild hair across my butt, and am fiddling with the WK after a long stint of not messing with it at all..
    so far I have put in the design Line Lockers, installed the Losi shocks, and next on the board is to tummy tuck it, install the RC4wd R2D tranny, and new servo mount...
    ( I am finally getting the Kings tranny to click and grind so its time.....)

  • #2
    Re: upgrading the ol king

    nice! now we just need to get you out to a comp!!

    Comment


    • #3
      Re: upgrading the ol king

      No going back! The frame is cut, I do however have to get some more all thread.....
      pics later!

      Comment


      • #4
        Re: upgrading the ol king

        Ok so here we go..
        The chassis is cut and the links are in place, still a comp legal 12 1/4, next up is mounting the tranny! Just gotta cut some plates, and away we go!

        Hmmmm these old links just arent going to cut the mustard...

        Ahhh much better, some nice heavy 8/32 all thread sleaved with polyethelyne tubing!

        and the obligitory flex shots...


        Comment


        • #5
          Re: upgrading the ol king

          looking good buddy!!

          Comment


          • #6
            Re: upgrading the ol king

            thats what im talking about. glad to see things are working out. the trans in YET

            Comment


            • #7
              Re: upgrading the ol king

              How many of you would have guessed that Crawler_King would have one of these???




              [attachment=0:c4hp2gt6]elvis.jpg[/attachment:c4hp2gt6]
              sigpic

              Rckcrwlr's Feedback Thread

              Comment


              • #8
                Re: upgrading the ol king

                Hey Dad....
                I have 2 of them!!!!


                Originally posted by Rckcrwlr
                How many of you would have guessed that Crawler_King would have one of these???




                [attachment=0:20hpn3t5]elvis.jpg[/attachment:20hpn3t5]

                Comment


                • #9
                  Re: upgrading the ol king

                  Not yet gotta get some spacers from the hardware store... I hope to have it done and intalled tommorow!
                  Originally posted by Lewis
                  thats what im talking about. glad to see things are working out. the trans in YET

                  Comment


                  • #10
                    Re: upgrading the ol king

                    Originally posted by crawler_king
                    Hey Dad....
                    I have 2 of them!!!!
                    Now I would lost that bet...
                    sigpic

                    Rckcrwlr's Feedback Thread

                    Comment


                    • #11
                      Re: upgrading the ol king

                      LOL! I have all the stuff yer grandma got rid of, the cool stuff that is!

                      Comment


                      • #12
                        Re: upgrading the ol king

                        Ok I have the driveshafts in, the upper trans mount is done and temporarily installed till I finalise the lower mounts Also have to get the electronics back in and figure out how the hell to run the linkage for the dig setup....

                        Comment


                        • #13
                          Re: upgrading the ol king

                          less than a week!! time is running out!!

                          Comment


                          • #14
                            Re: upgrading the ol king

                            Originally posted by Rockbound
                            less than a week!! time is running out!!

                            Meh that is plenty of time! My R2D is in pieces on the table as we speak...

                            Comment


                            • #15
                              Re: upgrading the ol king

                              Originally posted by Rockbound
                              less than a week!! time is running out!!
                              Heck I am working pretty well under preassure! It might end up being an 11th hour thrash out come saturday.... back to school this week and work... 14 hr days whooooo boy!
                              DANM I still gotta learn the characteristics of the new setup!!!

                              Comment

                              Working...
                              X