Announcement

Collapse
No announcement yet.

Wanna be Hustler build.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Wanna be Hustler build.

    Here's the start of a tuber I'm building for a customer. His truck is in serious need of a makeover!





    It needs nuts brazed on for mounting body panels, rear shock mounts then I can clean it up ond get it powder coated.

  • #2
    Re: Wanna be Hustler build.

    we can call it crawler overhauler!! HAHA you should make a show!

    Comment


    • #3
      Re: Wanna be Hustler build.

      Got the chassis done & axles mounted up. Still have to make body panels and get it all wired up



      Comment


      • #4
        Re: Wanna be Hustler build.

        shaping up nicely!

        Comment


        • #5
          Re: Wanna be Hustler build.

          Love those links...did you steal them off my TXT???
          sigpic

          Rckcrwlr's Feedback Thread

          Comment


          • #6
            Re: Wanna be Hustler build.

            they are HUGE!!

            Comment


            • #7
              Re: Wanna be Hustler build.

              I had this thing finished for a while now, and the customer had taken it home. He was having electrical problems and had to bring it back. So I thought I would get a few pics.





              For some reason electro dig doesn't work w/the EVX!?

              Comment


              • #8
                Re: Wanna be Hustler build.

                I had it hooked up on my clod running the DUD setup and EVX. I ran a single battery if that makes a difference.

                Comment


                • #9
                  Re: Wanna be Hustler build.

                  Originally posted by NickRummy
                  I had it hooked up on my clod running the DUD setup and EVX. I ran a single battery if that makes a difference.

                  I must have the wiring messed up When you switch on the dig it kills both motors & it starts smoking!
                  And it's running a single battery too.

                  Comment


                  • #10
                    Re: Wanna be Hustler build.

                    Originally posted by Crawln Coles
                    When you switch on the dig it kills both motors & it starts smoking!
                    When that happens to me...first thing I think is...I must have something wired wrong...
                    sigpic

                    Rckcrwlr's Feedback Thread

                    Comment


                    • #11
                      Re: Wanna be Hustler build.

                      yeah, sounds like a miss wire to me as well. better follow all the wires and check it out!

                      Comment


                      • #12
                        Re: Wanna be Hustler build.

                        yeh if both motors are cutting out you have problems! the switch should only be using wires from the rear motor?

                        Not sure if this will help out at all. The deans plug goes to the motor lead on the speed control. Looks like both negative cables to the center terminal and the positive leads on either end. Not sure which one is NC and NO though.

                        Comment


                        • #13
                          Re: Wanna be Hustler build.

                          http://www.rccrawler.com/forum/showt...17#post1221917
                          Link courtesy of "The Stick King"

                          Hope this helps .

                          Comment


                          • #14
                            Re: Wanna be Hustler build.

                            The link doesn't work for me, but he's the one who wired it!

                            Comment

                            Working...
                            X