Announcement

Collapse
No announcement yet.

INTEGY CLOD PARTS

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • INTEGY CLOD PARTS

    has anyone her us any of the integy clod parts? i am building up a set of clod axles, and was thinking about using these:

    http://www.integy.com/cgi-bin/webc.cgi/ ... 7&p_catid=

    and the integy clod CVD's:
    http://www.integy.com/cgi-bin/webc.cgi/ ... 3&p_catid=

    has anyone here used them with any luck?

  • #2
    Re: INTEGY CLOD PARTS

    Originally posted by STEEL_CITY_CRAWLER
    has anyone her us any of the integy clod parts? i am building up a set of clod axles, and was thinking about using these:

    http://www.integy.com/cgi-bin/webc.cgi/ ... 7&p_catid=

    and the integy clod CVD's:
    http://www.integy.com/cgi-bin/webc.cgi/ ... 3&p_catid=

    has anyone here used them with any luck?
    I would stay away from the CVD's... the tubes don't look bad. You could go with the alum one's to get some weight down low...
    sigpic

    Rckcrwlr's Feedback Thread

    Comment


    • #3
      Re: INTEGY CLOD PARTS

      cool, thanks for the input. i wonder if the TTR CVD's will work with those tubes and knucks.....

      or really since i need 2 sets am i just better off going to JP customs and geting the works from him? being that it might be juuust a little bit more for the JP customs stuff....

      Comment


      • #4
        Re: INTEGY CLOD PARTS

        x2 on the cvds, i have heard bad things about them.

        cant go wrong with jp!

        Comment


        • #5
          Re: INTEGY CLOD PARTS

          axles are fine.
          DO NOT USE INTEGY SHAFTS!!!!
          They seem weaker than the stock clod, and the cvd break during installation
          TTR or stainless

          Comment


          • #6
            Re: INTEGY CLOD PARTS

            Go with TTR or RC4WD Stainless on the shafts. Tubes and such IMHO is just extra bling. The stockers work just fine.

            Comment


            • #7
              Re: INTEGY CLOD PARTS

              Originally posted by Bustedcrawler
              Go with TTR or RC4WD Stainless on the shafts. Tubes and such IMHO is just extra bling. The stockers work just fine.
              agreed i have never broke a stock one yet, i've only broke 1 stock plastic knuckle in 5 years.

              Comment


              • #8
                Re: INTEGY CLOD PARTS

                Originally posted by Rockbound

                agreed i have never broke a stock one yet, i've only broke 1 stock plastic knuckle in 5 years.
                Its those damn electronics that you have the issue with.

                Comment


                • #9
                  Re: INTEGY CLOD PARTS

                  yeah, i have to get that stuff figured out! or stay away from water! lol

                  Comment


                  • #10
                    Re: INTEGY CLOD PARTS

                    Im new here, but not new to RC. I steer clear of integy stuff. I bought a set of MSR5 piggy back shocks for my savage last year. The first run out, i bent a shaft and I wasnt doing anything that I didnt do with the truck stock. I dont know what it is about their metal, but it has alot of weak points in it. This is just my opinion, but i wanted to share. Ive had other bad experiences with their products as well.

                    Comment

                    Working...
                    X