Announcement

Collapse
No announcement yet.

clod based super

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • clod based super




    nn chassis
    17 1/4 wheel base
    taxxas bigbore shocks
    rc4wd stainless steel axle shafts
    home made behind axle steering on front
    hobbico 333oz tg servos
    2-cc sidewinders
    2 holmes hobbies black revolver outrunners 1000kv
    cc bec set at 6.4v
    2200 3cell lipo
    futaba 3pm 2.4 setup with a front dig programmed off 3rd ch. mixing
    axial narrow rims with moab xl's, custom memory foams in front
    might stretch to 19+ inches with delrin links

  • #2
    Re: clod based super

    Looks good! I didn't catch your location. Any chance of bringing that to the next comp?

    Comment


    • #3
      Re: clod based super

      thanks. Located in western new york. Is that battle grounds comp full yet? Looks fun. Would be a long ride. See if I can talk a few other club members (http://www.wnyrcrc.com) into going.
      Any closer ones?

      Comment


      • #4
        Re: clod based super

        Originally posted by 63comet
        thanks. Located in western new york. Is that battle grounds comp full yet? Looks fun. Would be a long ride. See if I can talk a few other club members (http://www.wnyrcrc.com) into going.
        Any closer ones?
        Unfortunately it is closed for signups.

        Unless someone would pull out...
        sigpic

        Rckcrwlr's Feedback Thread

        Comment


        • #5
          Re: clod based super

          looking good!!

          glad to see some more clod guys in the forum!

          Comment


          • #6
            Re: clod based super

            more updates. I machined a 12mm hex into a 17mm wheel nut so I could get rid of the spacers.(17mm nut slides over the stock clod nut). Took off 2" of width. It is more menuverable now. Also had to put softer springs on. I threw on a smaller body that won't get caught up. made up a beefier front steering rod because I kept bending the other one.



            I threw a couple pics up of my cousins 2.2 clod.

            Comment


            • #7
              Re: clod based super

              Love that body...wait until you see what my super is for 2009
              sigpic

              Rckcrwlr's Feedback Thread

              Comment


              • #8
                Re: clod based super

                sweet! looking good!

                like that steering, give us some pics of the hexes you machined!!

                Comment


                • #9
                  Re: clod based super

                  Here ya go. Best I could get with my camera

                  Comment


                  • #10
                    Re: clod based super



                    very nice! got an extra set laying around

                    Comment


                    • #11
                      Re: clod based super

                      When I make some more I will let ya know. I saved the program in the mill at work.

                      Comment


                      • #12
                        Re: clod based super

                        nice!!

                        Comment

                        Working...
                        X