Announcement

Collapse
No announcement yet.

Need a little help with my links....

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need a little help with my links....

    Ok, I am swapping in some high clearance links on the ol WK.. however I cut down the front ones only to find that they are solid... UH OH... Does anyone have some sort of drill press or micro lathe to machine out a hole for the 4-40 hardware to attach the ball ends?
    Lemme know....
    Thanks

  • #2
    Re: Need a little help with my links....

    I have a drill press...is there part of the hole there to start...

    Will you need to cut down both or just the fronts to keep you in the 12.5 range???
    sigpic

    Rckcrwlr's Feedback Thread

    Comment


    • #3
      Re: Need a little help with my links....

      nope there is nothing.... flat surface, I cut the friont links up at my gf's folks house, and discovered that they were solid..

      Comment


      • #4
        Re: Need a little help with my links....

        If you want to drop them off at AB-C...I should be down there this week and can pic them up and try to do them "in my spare time"...

        Not sure what the weekend will bring...
        sigpic

        Rckcrwlr's Feedback Thread

        Comment


        • #5
          Re: Need a little help with my links....

          I'll try and drop them off today!. Thanks Dad!

          Comment

          Working...
          X