Announcement

Collapse
No announcement yet.

Scale tire question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Scale tire question

    Do you guys glue your tires on for your scale rigs? Do you need to glue them on if you are running in water? I have memory foams, and I don't want to trash them.

    Thanks

    Steve

  • #2
    Re: Scale tire question

    Originally posted by Stburr91
    Do you guys glue your tires on for your scale rigs? Do you need to glue them on if you are running in water? I have memory foams, and I don't want to trash them.

    Thanks

    Steve

    If you have Mem foams you MUST glue them or use beadlocks with NO air holes.

    Water and mem foams is not recommended as it degrades the foam over time.

    Comment


    • #3
      Re: Scale tire question

      i glued the 1.9's i had because i had to big of a motor. the wheel slipped inside the tire.

      Comment


      • #4
        Re: Scale tire question

        beadlocks all the way baby!!

        water and memory foams is a bad idea, i would reccomend running regular foams in your scaler, the performance my be a little worse but its a scaler no competition, and you wont have to worry about ruining and replacing foams. my 2 cents.

        Comment


        • #5
          Re: Scale tire question

          Hmmm I knew that water and regular foams was bad... but didnt know that mem foam and water was bad.. looks like I need to plug my airholes.

          Comment


          • #6
            Re: Scale tire question

            If you don't have bead locks definitly glue them , they will spin off regularly.

            Comment

            Working...
            X